How to set up sFTP for using Certificate Authentication on Linux

These instructions apply to users who are receiving their statements via sFTP. If you elected to receive your statements via sFTP, you would first need to generate an RSA Key pair.

There are many Linux distributions and there are multiple methods to access the IBKR sFTP server. sFTP clients such as Filezilla can be used. In this article we explain how to realize the connection to the IBKR FTP server using Ubuntu Linux and Filezilla.

 

  • How to generate an RSA Key pair

1. On your Linux machine, click on the Applications icon in the bottom left corner of you screen.

2. In the search box, type terminal and then click on the Terminal icon in the search results.
 
3. In the Terminal window, type sudo apt-get install filezilla putty-tools in order to install the required software. Enter your sudo password when requested.


4. Once the software installation is complete, type puttygen -t rsa -b 2048 -o privatekey.ppk in order to generate the RSA Key pair.
You will be asked to enter a passphrase and type it again to confirm.
PLEASE NOTE: Keeping a secure copy of this password is essential. Any loss of this password will require the whole process to be repeated.
 
5. Type puttygen -L privatekey.ppk -o public.key in order to export the public part of the Key pair to the file public.key


6. Click on the Applications icon in the bottom left corner of your screen.
 
7. In the search box, type FileZilla and then click on the FileZilla icon in the search results.

8. Click on the FileZilla top menu File -> Site Manager...
 
9. In the Site Manager window, click on the button New site to create a new connection.
 
10. In the right panel (called General):
  • Select SFTP - SSH File Transfer Protocol as Protocol
  • Enter xfer.interactivebrokers.com in the Host field
  • Enter 32 in the Port field
  • Select Key file as Logon Type
  • Enter the username provided to you by Interactive Brokers in the User field
 
11. Click on Browse next to the Key file field.
 
12. Move to the folder where your Key pair was created (normally your user folder: /users/yourusername/). Select the file privatekey.ppk and click on the Open button. This will set it as the Key file in your connection parameters.
 
13. Click on Rename and select a name of your preference for this connection (e.g. IBKR sFTP). Press Enter to confirm the name.
 
14. Click on OK to save your connection parameters.
 
15. Click on the folder icon on the left hand toolbar of your Desktop. This will launch the File application.
 
16. Move to the folder where you saved your Key pair (normally your user folder: /users/yourusername/). Right click on the file public.key and select Send to...
The file will be attached to an empty email. Send the email to the Reporting Integration Team, as per IBKB3842.
Important Note: do NOT send us your private key. Send us only your public one

 

  • How to connect to our sFTP Server

Once IBKR has configured the parameters for your connection on our servers, you will be notified. After that, you will be able to access your sFTP repository by using the Site connection you have created in FileZilla. In case you have not yet set up a Site connection, please follow the steps from 6. to 14. which are a prerequisite to the below steps:

1. Click on the Applications icon in the bottom left corner of you screen.
 
2. In the search box, type FileZilla and then click on the FileZilla icon in the search results.
 
3. On the FileZilla top toolbar, click the down arrow icon and select the Site connection you previously created (e.g. IBKR sFTP)
 
4. FileZilla will now establish a connection to our sFTP Server and show the files present in your repository.

 

Common issues and solutions

A. The Login Credentials Provided are Incorrect
  1. Ensure the correct login details are being used to connect to the sFTP server. The username and password you are entering should match the ones you have received from the Reporting Integration Team.
  2. Confirm you have configured your sFTP Client to use the Private Key file for the logon authentication (see steps 9. and 10. of the above procedure.)
B. Server Refused Our Key
  1. Try accessing the sFTP server using a different Client (CyberDuck, ect.)
  2. Ensure the Private Key file being used to Authenticate the server login attempt is related to the Public Key you originally sent to the Reporting Integration Team.
  3. Should the above checks be unable to resolve the issue, please generate a new RSA Public/Private Key pair and send only the Public part to the Reporting Integration Team, as per IBKB3842.
C. Connection Timed Out
  1. In case you have an antivirus or a security software installed on your machine, make sure it is not blocking the FTP connection attempt. Normally, security software allows to set up exceptions for specific connections in order to whitelist them.
  2. Verify that the public IP Address of the machine running the sFTP client, is the same you have originally provided to the Reporting Integration Team for being whitelisted. You can discover your public IP Address by searching the Internet for “what is my IP”. If your current IP Address is not the same you provided to us, please send it to our Reporting Integration Team for being whitelisted.
  3. Ask your network administrator/s to confirm that your firewall allows both incoming and outgoing traffic from/to xfer.interactivebrokers.com on port TCP 32.
  4. Should the above steps be unable to resolve the issue, please generate a new RSA Public/Private Key pair and send only the new Public part to our Reporting Integration Team, as per IBKB3842.

 

References

KB3968 - Generate a key pair using GPG for Windows
KB4205 - Generate a key pair using GPG Suite on macOS
KB4108 - Decrypt your Reports using GPG for Windows
KB4210 - Decrypting Reports using your PGP Key pair on macOS
KB4407 - Generate RSA Key Pair on Windows
KB4578 - How to Access your Reports using FTP on Windows
KB4580 - How to Access your Reports using FTP on MacOS
KB4409 - How to set up sFTP for using Certificate Authentication on Windows
KB4410 - How to set up sFTP for using Certificate Authentication on macOS
KB4411 - How to backup your public/private Key pair 
KB4323 - How to transfer your public/private key pair from one computer to another

 

Exchange name change

Overview:

Interactive Brokers is completing an effort to update and consolidate exchange names where appropriate. When this effort is complete, the following updates will be in effect:

  • GLOBEX and CMECRYPTO will be consolidated to a single exchange, ‘CME’
  • ECBOT will be updated to ‘CBOT’
  • COMEX listed metals (previously reflected as NYMEX) will be updated to exchange ‘COMEX’
  • NYMEX, no change

Given the breadth of products involved, we are migrating in four waves based on underlying products:

Key Effective Trade Date Products
Wave 1 October 30, 2022 GLOBEX: ZAR, LB, DA, IXE
Wave 2 November 6, 2022 GLOBEX: EMD, BRE, CHF, SOFR3, E7, NKD
CMECRYPTO: BTCEURRR, ETHEURRR, MET
Wave 3 November 13, 2022 GLOBEX: All remaining products
CMECRYPTO: All remaining products
ECBOT: ZO, ZR, 2YY, 30Y
NYMEX: ALI, QI, QC
Wave 4 December 4, 2022 ECBOT: All remaining products
NYMEX: All remaining "Metal" products

 

I am trading via API, how does this impact me?

For API clients the only requirement would be to provide a new exchange name, for example: exchange=”CME”, for existing contracts for the affected exchanges.

Old exchanges names will no longer be available after the change.

More details can be found within our FAQs through the following link: Upcoming Exchange name Changes

Note: If you are using a third party software connected to TWS or IB Gateway and that software does not recognize the new contract definitions, please contact the third party vendor directly.

How to Upload a Diagnostic Bundle from an IBKR Platform

Overview: 

Some support related issues require diagnostics files and logs to be uploaded along with screenshots. The information will help our team to investigate and resolve the issue that you are experiencing.

This article will help you with detailed steps on how to upload diagnostics files and logs from various Interactive Brokers’ trading platforms.

Note: IBKR does not monitor the diagnostic bundle repository throughout the day. Should you spontaneously decide to upload a diagnostic bundle, without being instructed by Interactive Brokers, please inform our Client Services via Message Center ticket or phone call otherwise your error report will go unnoticed.

 

Please click on one of the links below, according to the platform you are using:

 
1. Log in to TWS and try to replicate the issue that you are experiencing
2. Press ‘Help’ at the top left corner and select ‘Upload Diagnostics’. Alternatively, depending on your Operating System, you can use the following keyboard combinations
  • For Windows and Linux Operating system: Press Ctrl+Alt+Q
  • For Mac: Press Cmd+Option+H
3. The ‘Upload Diagnostics’ window will appear. You may enter the reason for uploading diagnostics in the text box
4. If an Interactive Brokers representative has instructed you to include previous days logs or select specific options when uploading diagnostics, click the dropdown on the right top corner, select ‘Advanced View’ and tick the correspondent checkboxes which will appear on the bottom left part
5. Make sure the checkbox ‘Include screenshot of entire desktop’ is enabled and press ‘Submit’
6. Do not perform any action/activity on your computer until you see the below pop-up, confirming that the diagnostics have been successfully uploaded
 
 
 
 
A) If you are at the login Screen:
1. Tap the three dots icon in the right top corner and select ‘Upload Diagnostics’
2. Add your username in the comment section and tap ‘Upload’
 
B) If you are already logged  in to the app:
1. Tap the three lines icon in the top left corner to open the menu
2. Tap ‘Configuration’> ‘Trouble Reporting’> enable the check box next to ‘Debug mode
3. If requested by an Interactive Brokers representative, enable the check box next to ‘Extended Log’ as well
4. Navigate to the page where you are experiencing the issue
5. Tap the three dots icon in the top right corner of the screen and select ‘Upload Diagnostics’
6. Enter your comments in comment section and enable the checkbox next to ‘Attach Screenshot’. Then tap ‘Upload’
 
 
 
 
A) If you are at the login Screen:
1. Tap five times in a quick sequence on the IBKR logo to open the testing menu
2. Under Configuration, enable the toggle button next to ‘Debug mode
3. Tap ‘Send’ next to ‘Upload diagnostics’
4. Enter your username in the comments section and tap ‘OK’
 
B) If you are already logged in to the app:
1. Capture screenshots displaying the issue you are experiencing directly on the phone (pressing together the physical buttons Power + Volume Up)
2. Tap the option ‘More’ in the right bottom corner of the screen
3. Tap ‘Configuration’ and expand the section ‘Trouble Reporting’
4. Enable the toggle button next to ‘Debug mode’ and, next to ‘Upload diagnostics’, tap ‘Send’
 
5. The ‘Send Diagnostics’ page will appear. Enter your comments in comment section
6. Tap the ‘Attach Image’ button to attach screenshots of the issue that you have previously saved in your camera roll
7. Tap ‘Send’
 
 
 
1. Log in to the app
2. Tap the User icon in the top left corner and select ‘Settings’
3. Tap the option ‘Advanced’ and enable the toggle button next to ‘Debug mode
4. If requested by an Interactive Brokers representative, enable as well the toggle button next to ‘Extended Log’
5. You will see an ‘Upload Diagnostics’ pop-up. Enter your comments in the field and tap ‘Upload’
 
Note: If you need to send us screenshots of IMPACT or IBKR GlobalTrader for Android, you would have to attach them to a Message Center web ticket, as explained in IBKB1071
 
 
 
1. Log in to the app
2. Capture one or more screenshots displaying the issue you are experiencing directly on the phone (pressing the physical buttons Power + Volume Up simultaneously)
3. Now tap the User icon in the top left corner and select ‘Settings’
4. Tap ‘Advanced’
5. Enable the toggle button next to ‘Debug mode’ and tap ‘Upload Diagnostics’
6. The ‘Send Diagnostics’ screen will appear

7. Enter your comments in the field and tap ‘Attach Image’ to attach the screenshot/s you previously saved in your camera roll

8. Tap ‘Send’
 

 

A diagnostic trace for Client Portal can be captured following the steps on IBKB3512

 

Generate RSA Key Pair on Windows

These instructions apply to users who are receiving their statements via sFTP. If you elected to receive your statements via sFTP, you would first need to generate an RSA Key pair.

To generate an RSA Key pair:

1. Download WinSCP.

2. Run the installer and make sure to check PuTTYgen (key generator) as one of the components to install.

3. Start WinSCP and from the button Tools select Run PuTTYgen.


4. Once the tool PuTTYgen has been launched, click Generate. Select RSA as Type of key to generate, 2048 as Number of bits in generated key and click on the button Generate.

5. Click "Save private key" and give the file a name (like private). Leave the extension as .ppk  ('ale.ppk', in the picture below is an example filename).
Important Note: do NOT save your public key yet. Save only your private one.

6. Open WinSCP, create a new connection and:
  • Select SFTP as File protocol.
  • Enter xfer.interactivebrokers.com in the Host name field.
  • Enter 32 in the Port number field.
 
7. Click on the button Advanced.

8. In the Advanced Site Settings screen, left side menu, expand SSH and select Authentication. Click on the button ... at the end of the field Private Key file and open the private key you previously saved at point 5):

9. Click on the button Display public key:
 
10. Click on the button Copy Key.

11. Open Notepad, press CTRL+V to paste the key string (which is one string of characters without spaces) and then save the file with the name public.key in a folder of your preference:


12. Send the file you saved at the previous step to us via Message Center ticket or email as per instructions on IBKB3842
 
13. In the WinSCP Window, click on "OK" in the information pop-up showing the key, then "OK" in the Advanced Site Settings screen, then click on Save to save the new connection you have created.
 
14. Once the IBKR Sales Engineering Team has configured the parameters for your connection on our servers, you will be able to access your SFTP repository by using the connection you have created.
 
Related articles

KB3842 - Using GPG/RSA encryption keys to guarantee the privacy and security of your Reports
KB3968 - Generate a key pair using GPG for Windows
KB4205 - Generate a key pair using GPG Suite on macOS
KB4108 - Decrypt your Reports using GPG for Windows
KB4210 - Decrypting Reports using your PGP Key pair on macOS
KB4578 - How to Access your Reports using FTP on Windows
KB4580 - How to Access your Reports using FTP on MacOS
KB4409 - How to set up sFTP for using Certificate Authentication on Windows
KB4410 - How to set up sFTP for using Certificate Authentication on macOS
KB4411 - How to backup your public/private Key pair 
KB4323 - How to transfer your public/private key pair from one computer to another 
 

Transferring your Key Pair From One Computer To Another

Background: 

If you need to decrypt files that were encrypted with your private Key on an additional computer, you need to copy both your private and public keys (the entire Key pair) to that computer.

Note: this tutorial assumes you have already set up a Key pair. If you need guidance to set up the Key pair please refer to this article, which is a prerequisite to the instructions below.

 

How to transfer your Key pair:

Please select one of the below links, according to your Operating System:

 

Windows

1. On the machine where the encryption keys are stored, connect a USB drive to a free USB port.

2. Launch the Kleopatra application and select the encryption key you want to transfer. Then right-click on the selection and choose Backup Secret Keys...

Note: Do NOT use Export..., as this will only export the public part of the Key while you need to have a backup of both public and private parts.

3. Select your USB drive as destination and a filename of your preference (e.g. secret-key-KEYID.asc) for your backup copy. Then click Save.

4. Enter the passphrase you have set when you created the Key and click OK.

5. A pop-up will confirm the backup has been successfully created. Click OK.

6. Eject your USB drive safely through the Windows interface to prevent data loss and connect it to a free USB port on the other computer (the one you want to transfer the key to). All the next steps have to be executed on that machine.

7. Make sure the the GPA software is installed, otherwise please install it. Make sure that the component Kleopatra is selected as one of the sub components to include in the installation.

8. Launch the Kleopatra application and click on the top menu File and select Import...

9. Click on the letter correspondent to your USB drive and select the file you have previously saved (e.g. secret-key-KEYID.asc). Then click Open.

10. Click on Yes, It's Mine.

11. A pop-up will confirm the Key has been successfully imported. Click OK. You may now want to delete the key file from the USB drive and empty the Trash.

 

macOS

1. On the machine where the encryption keys are stored, connect a USB drive to a free USB port.

2. Launch the GPG Keychain application and select the encryption key you want to transfer. Please make sure that you see the text Type: Secrete and public key, in the Type column.

3. With the desired encryption key highlighted, click Export. Please make sure to check the box for the option Include secret key in exported file, as illustrated in the above screenshot. Save the key pair to the USB drive.

4. Eject the USB drive and connect it to a free USB port on the other computer (the one you want to transfer the key to). All the next steps have to be executed on that machine.

5. Make sure the GPG Tools suite is installed, otherwise please install it.

6. Launch the GPG Keychain application and click the icon Import on the top toolbar.

7. Click the USB Drive and select the previously saved .ASC file that contains the Public and Private key. Then click Open.

8. The confirmation should read Import successful.

9. Once the key has been successfully imported, delete the key file from the USB drive and empty the Trash.

 

Related articles

KB3842 - Using GPG/RSA encryption keys to guarantee the privacy and security of your Reports
KB3968 - Generate a key pair using GPG for Windows
KB4205 - Generate a key pair using GPG Suite on macOS
KB4108 - Decrypt your Reports using GPG for Windows
KB4210 - Decrypting Reports using your PGP Key pair on macOS
KB4407 - Generate RSA Key Pair on Windows
KB4578 - How to Access your Reports using FTP on Windows
KB4580 - How to Access your Reports using FTP on MacOS
KB4410 - How to set up sFTP for using Certificate Authentication on macOS
KB4411 - How to backup your public/private Key pair 
 
 

Decrypting Reports Using Your PGP Key Pair on macOS

Note: This tutorial assumes you received reports via email or via FTP that were encrypted with the public key you sent to IBKR . If you need guidance to set up the encrypted statement delivery, please refer to this article, which is a prerequisite to the instructions below.

1. Open Finder

2. Right click on the .gpg file you want to decrypt

3. Select Services > OpenPGP: Decrypt File

 

Common Issues/Questions

  • Decryption failed with error 'No Secret Key'

This is commonly caused when the wrong encryption key is used to decrypt the file.  If decryption is being done on a computer other than the original computer used to create the public/private keys, the keys would have to be transferred from the original computer to the new computer

If the above does not help, then a new public/private key pair needs to be created and sent to us.

 

Related articles

KB3842 - Using GPG/RSA encryption keys to guarantee the privacy and security of your Reports
KB3968 - Generate a key pair using GPG for Windows
KB4205 - Generate a key pair using GPG Suite on macOS
KB4108 - Decrypt your Reports using GPG for Windows
KB4407 - Generate RSA Key Pair on Windows
KB4578 - How to Access your Reports using FTP on Windows
KB4580 - How to Access your Reports using FTP on MacOS
KB4409 - How to set up sFTP for using Certificate Authentication on Windows
KB4410 - How to set up sFTP for using Certificate Authentication on macOS
KB4411 - How to backup your public/private Key pair 
KB4323 - How to transfer your public/private key pair from one computer to another 
 

Decrypt Your Reports Using GPG for Windows

Note: This tutorial assumes you received reports via email or via FTP that were encrypted with the public key you sent to IBKR. If you need guidance to set up the encrypted statement delivery, please refer to this article, which is a prerequisite to the instructions below.

How to decrypt files using Kleopatra:

1. Save all the encrypted Reports you received via email or FTP in a folder on your preference (e.g. Desktop)

2.  Start the Kleopatra application (included in Gpa4win software). The entry for your Key should be listed in the All Certificates panel. Click the top menu File and select Decrypt/Verify...

 
3.  Open the folder containing your encrypted files and select the ones you want to decrypt.
 
 
4.  Provide the passphrase you set when you create your Key.
 
 
5.  The files will be decrypted and the outcome of the operation will be displayed within the panel. You can change the output folder (where the decrypted files will be saved) if you wish. Click Save All to finalize the process.
Note: do NOT click Discard, otherwise the decrypted files will not be saved.
 
 
6.  Open the Windows File Explorer and navigate to the output folder you selected at the previous step. From there, you can access and open your clear-text files.
 
 
 
 

Common Issues/Questions

  • Decryption failed with error 'No Secret Key'

This is usually caused by the wrong encryption key being used to decrypt the file.  If decryption is being done on a computer other than the original computer used to create the public/private keys, the keys would have to be transferred from the original computer to the new computer

If the above does not help, then a new public/private key pair needs to be created and sent to us.

 

References

KB3842 - Using GPG/RSA encryption keys to guarantee the privacy and security of your Reports
KB3968 - Generate a key pair using GPG for Windows
KB4205 - Generate a key pair using GPG Suite on macOS
KB4210 - Decrypting Reports using your PGP Key pair on macOS
KB4407 - Generate RSA Key Pair on Windows
KB4578 - How to Access your Reports using FTP on Windows
KB4580 - How to Access your Reports using FTP on MacOS
KB4409 - How to set up sFTP for using Certificate Authentication on Windows
KB4410 - How to set up sFTP for using Certificate Authentication on macOS
KB4411 - How to backup your public/private Key pair 
KB4323 - How to transfer your public/private key pair from one computer to another 
 

How to generate a ".har" file

Background: 

When troubleshooting a non-trivial website issue, it is sometimes necessary for our Client Services team to obtain additional information about your browser communication. You may be asked record and provide a .har file. This file contains additional information about the network requests that are sent and received by your browser. Your browser can generate such file by recording content, timeline and status of HTTP/HTTPS requests and responses while the issue occurs.

In this article we explain how to generate a .har file. Please click on the browser that you use in the list below:

 

To generate the HAR file for Google Chrome:

1. Open Google Chrome and go to the page where the issue is occurring.

2. Press CRTL +SHIFT + I on your keyboard. Alternatively, click on the Chrome menu icon (three vertical dots at the top-right of your browser window) and select More Tools > Developer Tools

3. The Developers Tools opens as a docked panel at the side or bottom of Chrome. Select the tab Network (Figure 1.)

Figure 1.

4. Look for a round Record button in the upper left corner of the Developer Tools toolbar and make sure it is red. If it is grey, click it once to start recording or just press CTRL+E (Figure 2.)

Figure 2.

5. Activate the checkbox Preserve log (Figure 3.)

Figure 3.

6. Click the Clear button to clear out any existing logs. The Clear button has a stop icon and is located on the right of the Record button (Figure 4.)

Figure 4.

7. Reproduce the issue you are experiencing while the network requests are being recorded.

8. Once you have reproduced the issue, right-click anywhere on the list of recorded network requests, select Save all as HAR with Content, and save the file to a location of your preference on your computer (e.g. on your Desktop).

9. From the IBKR Client Portal, go to the Message Center and create a new Web Ticket (or use an existing one when applicable)

10. Within the Web Ticket, attach the .har file previously generated.  In case the IBKR Client Services has provided you with a reference ticker number or representative name, please add this information to the ticket body.

11. Submit the Web Ticket

 

To generate the HAR file for Firefox:

1. Open Firefox and go to the page where the issue is occurring

2. Press F12 on your keyboard. Alternatively click the Firefox menu icon (three horizontal parallel lines at the top-right of your browser window), then select Web Developer > Network

3. The Developers Network Tools opens as a docked panel at the side or bottom of Firefox. Select the tab Network (Figure 5.)

Figure 5.

4. Activate the checkbox Persists logs (Figure 6.)

Figure 6.

5. Reproduce the issue you are experiencing. The recording of the network request starts automatically.

6. Once you have reproduced the issue, right-click anywhere on the list of recorded requests and select Save All As HAR

7. Save the file to a location of your preference on your computer (e.g. on your Desktop)

8. From the IBKR Client Portal, go to the Message Center and create a Web Ticket (or use an existing one when applicable)

9. Within the Web Ticket, attach the .har file previously generated.  In case the IBKR Client Services has provided you with a reference ticker number or representative name, please add this information to the ticket body

10. Submit the Web Ticket

 

To generate the HAR file for Microsoft Edge:

1. Open Edge and go to the page where the issue is occurring.

2. Press F12 on your keyboard. Alternatively click the Edge menu icon (three horizontal dots at the top-right of your browser window), then select More Tools > Developers Tools

3. Click the Network tab (Figure 10.)

Figure 10.

4. Reproduce the issue that you were experiencing before, while the network requests are being recorded.

5. Once done click the floppy disk icon (Export as HAR) or press CTRL+S (Figure 11.)

Figure 11.

6. Provide a filename and a location of your preference on your computer (e.g. on the Desktop). Then click the Save button

7. From the IBKR Client Portal, go to the "Message Center" and create a Web Ticket (or use an existing one when applicable)

8. Within the Web Ticket, attach the .har file previously generated.  In case the IBKR Client Services has provided you with a reference ticker number or representative name, please add this information to the ticket body.

9. Submit the Web Ticket

 

To generate the HAR file for Safari:

Note: Before generating the HAR file, make sure you can see the Develop menu in Safari. If you do not see this menu, click on the menu Safari, choose Preferences, go to the tab Advanced and activate the checkbox next to Show Develop menu in menu bar

1. Open the Develop menu and select Show Web Inspector or press CMD+ALT+I

2. Click the Network tab (Figure 12.)

Figure 12.

3. Activate the checkbox Preserve log (Figure 13.)

Figure 13.

4. Click on the icon Export (or press CMD+S), provide a filename and a location of your preference on your computer (e.g. on the Desktop) and save the .har file

5. From the IBKR Client Portal, go to the "Message Center" and create a Web Ticket (or use an existing one when applicable)

6. Within the Web Ticket, attach the web archive file previously generated.  In case the IBKR Client Services has provided you with a reference ticker number or representative name, please add this information to the ticket body.

7. Submit the Web Ticket

 

How to use Voice callback for receiving login authentication codes

Background: 

 If you have SMS enabled as two-factor authentication method, you may use Voice callback to receive your login authentication codes. This article will provide you steps on how to select voice callback when logging in to our platforms.

 

How to use Voice callback
 
You may select Voice if you do not receive your login authentication code. You will then receive your login authentication code via an automated callback. Follow the instructions below, depending on which platform you are trying to login to.
 

 

Client Portal

1. Click on "Didn't receive a security code?"

2. From the two options, select "Voice" and wait for the callback.

3. After selecting Voice, you should receive the callback within a minute. Please wait for the callback and be ready to write down the code that will be provided over the callback.

 

TWS

1. Click on "Request new Security Code"

2. From the two options, select "Voice" and click on OK. Then wait for the callback.

 3. After selecting Voice, you should receive the callback within a minute. Please wait for the callback and be ready to write down the code that will be provided over the callback.

Note: Voice callback for the TWS is only available in the LATEST and BETA version.

 

IBKR Mobile - iOS

1. Click on "Request New Code"

2. From the two options, select "Voice" and wait for the callback.

 3. After selecting Voice, you should receive the callback within a minute. Please wait for the callback and be ready to write down the code that will be provided over the callback.

 

IBKR Mobile - Android

1. Click on "Request New Security Code"

2. From the two options, select "Voice" and wait for the callback.

 3. After selecting Voice, you should receive the callback within a minute. Please wait for the callback and be ready to write down the code that will be provided over the callback.

 

References:

 

IBKR Mobile Authentication (IB Key) Use Without Notifications

In case your smartphone is unable to receive IBKR Mobile notifications, you can still complete the login process using the IBKR Mobile Authentication (IB Key) Challenge/Response method, described on the following pages (according to your device operating system):

The same information applies to you if your phone has no Internet connectivity (you are in roaming, out of coverage, without an active mobile data plan, etc.)

If your smartphone is unable to receive IBKR Mobile notifications despite having Internet connectivity, we recommend you to perform the steps outlined in the IBKR Knowledge Base.

 

Syndicate content